Fire Alarm System

Sounders are designed to simplify installations to provide primary and secondary for fire and security
applications. These are ideal where smaller notifications devices are desired. These sounders can be flush /
ceiling mounted with / without back box.

With three sizes to choose from, the 50-point MS-9050UDE, the 198-point MS9200UDLSE and the 636-point MS-9600E, our updated micro-scan addressable series can handle your smallest through larger sized applications. We’ve maintained our ease of installation, programming and maintenance, reducing the time it takes to get a system up and running.

Plus the MS-9200UDLSE and MS-9600E: off LiteSpeedTM blazin’fast pooling protocol to ensure the safety and security of your building and its occupants.

MI-LPB2-S2I is an addressable reflector-type linear optical beam smoke detectors designed to operate as a component of an intelligent fire alarm system. They operate primarily on the principle of light obscuration utilising an Infra-Red
beam. Optical beam smoke detectors are particularly appropriate for protecting buildings with large open spaces such as warehouses, atriums etc.

The MI-LPB2-S2I is a combined transmitter/receiver units that can be directly connected to an analogue loop circuit. The Infra-Red transmitter generates a beam of light towards a high efficiency reflector. The reflector returns the beam to the receiver where an analysis of the received signal is made. The change in the strength of the received signal is used to determine the alarm condition.

Alignment of the detector is simplified with the aid of the detector’s “gunsight” targeting device. Alignment of the detector with the reflector can then be “fine tuned” with the aid of a numerical signal strength indicator.

The sensitivity of the detector can be set to between 25% and 50% obscuration, providing application flexibility to suit the environment in which the detector will be installed.

In addition to the four fixed value alarm thresholds, there are two variable thresholds that automatically compensate for changes in the environment which could otherwise result in unwanted alarms while remaining within a known sensitivity range.

The detector incorporates automatic drift compensation, whereby the detector will adjust its detection thresholds in line with any long term signal reduction of the beam caused by contamination of the optical surface. The detector can be adjusted up to 10° vertically and horizontally for alignment. Where greater angular adjustment is required, the multi-mount accessory enables the detector to move through 28° vertically and 360° horizontally when ceiling mounted or up to 23° vertically and 90° horizontally when wall mounted.

MI-LPB2-S2I Introduces the Series 200 Advanced Protocol and is electrically and mechanically backwards compatible with previous generation (MI-LPB2), providing support for existing installations where retrofits and system extensions regularly take place.



The microprocessor based 4 Zone CE mark conventional fire alarm control panel is a standalone system, with 16 X 2 LCDcharacter, 4 zones detection circuit,3 common potential free contacts & a common NAC sounder output, wall/ceiling mounted, Switch mode power supply- SMPS & Battery polarity & Deep discharge protection.
RE-104 fire alarm control panel is designed with unique protocol to be used for small commercial building and small scale industries. The system is user friendly with includes all standard to ensure ease for use and high reliability.

Designed for use in the interconnection of security system elements; including fire protective signaling devices such as smoke detectors, fire alarms and two way emergency communication systems.

The IP based system enables you to unite and protect the most extensive of buildings, multiple facilities across a campus and even remotely monitor facilities throughout a city, across the country, or around the world.

fire alarm control panel (FACP), fire alarm control unit (FACU), or simply fire alarm panel is the controlling component of a fire alarm system. The panel receives information from devices designed to detect and report fires, monitors their operational integrity and provides for automatic control of equipment, and transmission of information necessary to prepare the facility for fire based on a predetermined sequence. The panel may also supply electrical energy to operate any associated initiating device, notification appliance, control, transmitter, or relay. There are four basic types of panels: coded panels, conventional panels, addressable panels, and multiplex systems.


The FSL100 Series of flame detectors from Honeywell delivers robust, fast, and reliable detection of flaming fires in a wide range of applications.

The range consists of UV, UV/IR and IR3 flame detectors. All utilize sophisticated sensing and signal analysis to detect fires quickly while also rejecting false alarms.




flame detector is a sensor designed to detect and respond to the presence of a flame or fire, allowing flame detection. Responses to a detected flame depend on the installation, but can include sounding an alarm, deactivating a fuel line (such as a propane or a natural gas line), and activating a fire suppression system. When used in applications such as industrial furnaces, their role is to provide confirmation that the furnace is working properly; in these cases they take no direct action beyond notifying the operator or control system. A flame detector can often respond faster and more accurately than a smoke or heat detector due to the mechanisms it uses to detect the flame

heat detector is a fire alarm device designed to respond when the convected thermal energy of a fire increases the temperature of a heat sensitive element. The thermal mass and conductivity of the element regulate the rate flow of heat into the element. All heat detectors have this thermal lag. Heat detectors have two main classifications of operation, “rate-of-rise” and “fixed temperature”. The heat detector is used to help in the reduction of damaged property. It is triggered when temperature increases.

KAC's wall mount sounder is a high quality loop powered device designed to alert building occupants of an emergency. It utilizes the System Sensor B501AP base for improved installation flexibility. When triggered by the fire panel its powerful sounder gives an audible warning. A choice of output levels and tones make the device suitable for a wide variety of applications.

Residential LPG/PNG/CNG Gas Leak Detector
with Cloud Connectivity
• Residential Kitchens
• Bungalows
• Make in India product.
• Gas + heat detection
• CE certified
• Unique patent design
• Auto resettable
• LEL bar-graph
Product Features:
• LPG detector detects when LPG concentration exceeds about 10% of LEL
• TrueSafe detector has unique patented enclosure design
• Cloud connectivity through Wi-Fi (internet connection).
• Microprocessor based design for accurate & quick detection
• Notification on the Android or iPhone APP
• TrueSafe residential Wi-Fi gas leak detector is
suitable for smart home, bungalows.
• India’s first IoT (Internet of Things) based Gas
leak detector.
• It detects LPG/PNG gas leakage & warns
before the gas density in air reaches to
unwanted levels.
• Four levels, 2.5%,

General specifications
Detection method Natural diffusion
Gases detected LPG/PNG/CNG
Sensor type Semiconductor
Sensor life span 2-3 years
Display Analog/ LEL display
Response time Less than 2 second
Warm-up period When TrueSafe is powered ON, it enters in the warm-up period for
approximately one minute. Gas leak and heat LED flashes rapidly and
simultaneously during warm-up period.
Electrical specifications
Power supply 230 V, AC 50 Hz
Power consumption 0.6 W (at +10 V) to 2 W (at +32 V)
Detection distance 3-4 Meter in radius
Environmental specifications
Operating temperature -100
to +550 C
Storage temperature -100
to +600 C
Humidity 0 to 95% Rh
Mechanical specifications
Protection class ABS
Cabinet material Polycarbonate
Cable entry Not required
Dimensions 111 x 90 x 40 mm (H x W x D)
Mounting Wall mounting/ Stand mounting
Weight Approx. 250 g
LED indications and output signal
LED Indications • Bar graph indication for Premium Model
10% LEL: Red LED
7.5% LEL: Yellow LED
5% LEL: Yellow LED
2.5% LEL: Yellow LED
• Wi-Fi Detection: Blue LED

Installation Procedure:
Fig1: For LPG detection
Note: LPG is heavier than air. It has tendency to settle down. Hence, when you are using
LPG cylinder, TrueSafe must be installed at 30cm height from the floor

Fig 2: For CNG/PNG detection
Note: Natural gas (LNG/PNG/CNG) is lighter than air. Hence when you are using it, TrueSafe must be installed 30cm below the ceiling

1. It can be mounted on the front door of kitchen cabinet of the LPG Cylinder. This will enable detection of gas leak from the cylinder as well as the gas stove.

2. If it is mounted behind gas cylinder, the cabinet for the gas must have grills to detect gas leak from the gas stove also. Please refer the following diagram

4. Locations to be avoided for installing TrueSafe
• Very near to exhaust fan
• By the side of a door or window
• In an enclosed space: Many times, LPG detector is mounted on the wall, behind the LPG cylinder, under the kitchen platform with the door without grill. This creates confined space around the detector and cylinder, regulator and tube connecting it. In such case, detector will effectively detect LPG leaks happening only in this confined space. If there is LPG leak from the gas stove because of either faulty connection to the tube or by leaving gas burner ON accidently without flame, LPG may not reach the confined area near the cylinder where LPG detector is installed and LPG detector may not detect such leaks as gas molecules do not reach the sensor. To avoid this, install as per Fig-1 or Fig-2 above.
• Directly above the gas stove
• Places where water can splash on the unit


The Intelligent Manual Call Point has been designed for indoor applications and are available in a variety of colours for different applications such as initiating a hazard rather than fire alarm. The Intelligent Manual Call Point can be used on XP95, Discovery and CoreProtocol Systems.

The BG-12 series from Fire-Lite Alarms is a cost-effective, feature-packed, non-coded series of manual fire alarm pull stations. They offer a variety of different models including single- and dual-action versions. The BG-12 series were designed specifically for use in multiple applications and offer the flexibility to meet the needs of both the installer and end-user

Showing 1–15 of 24 results